Termékek cortilux prémium (22)

Liquid product based on lithium silicates, which was created for the protective, consolidating and porosity reducer treatment of concrete, mineral, brick and stone substrates. It guarantees optimal durability and adhesion strength, resistance to UV rays, chemical agents and mechanical stresses. The result of the application allows to obtain a rapid hardening of the surface as well as a revived and homogeneous appearance of the same. The product has a negligible environmental impact thanks to the low VOC content (<50 g / l) and is practically odorless. Protective, reinforcing, water repellent treatments of concrete, mineral and stone supports. Specific product for revitalizing, simultaneously providing a great consolidation and an annulment of the dust produced in concrete supports, interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest. The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam it's recommended. The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. Keep the substrate wet with Consilex Idrofix for at least 20 minutes during application. If applied on floors, wait 24 hours before passing on the treated support. The reinforcing contribution will be completed after 2-3 weeks of treatment. From 0,20 to 1,00 kg of Consilex Idrofix per square meter of surface to be treated, based on the porosity of the support.

FUNCTION Micro-elements are essential for plant development and crop yield, however under certain circumstances micro nutrients may become seriously deficient in plant tissue owing to adverse soil type, soil pH and soil moisture. Deficiencies of micro-elements will cause a breakdown of complex metabolic systems involved in photosynthesis, respiration and amino acid synthesis. ACTIV COMBI applications provide the crop with a balanced range of micro-elements whichcan be readily absorbed through the leaves or the roots. DESCRIPTION Water soluble fluid emulsion containing chelated micro-elements, zınc and Manganese. Analysis of ACTIV COMBI Manganese (EDTA) Mn 2.0% pH (10% solution) Specific Gravity 5.0-8.0 1.1-1.2@18°C Contain trace of Iron (EDTA) Fe ,Copper (EDTA) Cu, Magnesium MgO and Sulphur S

Powder spot cleaner spray, high quality. Suitable for cotton, knitted, wool, silk, synthetic, mixed fabrics It removes spot of: oil, dirt, grease, halos. Fast drying It does not leaves any halos, or rings Chlorinated-free Not toxic Eliminate it with a brush or compressed air It does not indeed the colours

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

Miglioratore per fermalievitazione, adatto a paste lievitate, pani prelievitati o precotti destinati alla surgelazione. Formato:10 kg Dosaggio:1%

El humus es el abono resultante de todos los procesos químicos y biológicos sufridos por la materia orgánica en un proceso muy elaborado llamado vermicompostaje o mejor lombricompostaje como nos gusta a nosotros llamarle. El humus de lombriz es el resultado de la transformación digestiva que ejerce este pequeño animal, la lombriz, sobre la materia orgánica. Es decir, que la lombriz tiene la facultad de biodegradar la materia orgánica en cuestión de horas, lo que en forma natural se demora meses, gracias a la poderosa acción de su aparato digestivo, generando un producto de textura granular uniforme, forma cilíndrica, coloración café o negro oscuro y con un agradable aroma a tierra fresca. El humus de lombriz está compuesto por el carbono, el oxigeno, nitrógeno y todos los macro y microelementos que se utilizan para darle origen.

Walzgrund für Holz auf Basis UV-vernetzbarer Polyacrylatharze; verleiht UV-AC-Walzlackaufbauten eine ausgezeichnete Haftung zum Untergrund bei starker mechanischer Belastung. Innolux Primer Auftragsart Walzen

PROPERTIES Decorative and protection purpose, can be applied on plaster, concrete and any surface. Excellent adhesion ability works any surfaces. It does not crack, blister or spill. It is odorless, human and environment friendly. First class decorative paint which has a great coverage capability and applied easily.

Fully synthetic, multi-purpose oils for the long-term lubrication of gears, hydraulics, bearings and chains in a wide temperature range with generally good elastomer and plastic compatibility. Wide temperature range:Elastomer and plastic compatibility Fully synthetic:Multi purpose oil

Synthetic, multiple-alloy gear oils on ester oil base with high thermal stability as well as good wear and corrosion protection. They are suitable for the lubrication of high temperature gears, slide ways and chains. Fully synthetic:High thermal stability Corrosion protection:Chains, gears, slide ways

La poudre de diamant Diprotex est traitée à partir de matières premières de tous les types de diamants synthétique polycristallin, monocristallin et diamant naturel précisément en grade diamant tailles. Les granulométries standard varient de 050 nanomètres jusqu’à 6080 microns. Cette gamme serrées de tailles de diamants a été conçue pour affiner votre processus nécessaires à la finition de surface et le taux d’enlèvement maximum. Les caractéristiques exceptionnelles des poudres de diamant micron de Diprotex font une différence remarquable dans le contexte actuel des applications critiques. Traitement brut des abrasifs diamant fini en diamant de taille micron.Il est le résultat de l’optimisation de nos procédés de fabrication, associé aux techniques de production, systèmes de mesure très sensible et efficace, certifiée ISO 9001 de gestion du système qualité.

Our yarns are used in weaving, knitting and knitwear as well as women's / men's clothing, military, safety and outdoor clothing, as well as lace, socks, seamless clothing, sportswear and technical textiles. Polyamide (nylon) yarns are also used in fabric production together with natural or other synthetic yarns. Denier : 90- 100 Filament :48 Yarn Type :FDY Yarn Type :Textured Yarn cross-section :round Color :half mat Color:Full mat Color:Dope Dyed

Entöltes Soja-Lecithin LECIFINE 100 ist ein entöltes Soja-Lecithin, hergestellt aus gentechnikfreien Sojabohnen (NON-GMO). LECIFINE 100 wird für feine Backwaren, Kekse, Waffeln, Instantprodukte, Kakaopulver und Hefeteig-Fertigmehle verwendet. LECIFINE 100 verbessert die Fettverteilung und ermöglicht eine gleichmäßige Bräunung. Außerdem sorgt es für eine feinere Krume, verlängert die Frischhaltung und vergrößert das Volumen der Backwaren. LECIFINE 100 hat einen hohen Gehalt an Phospholipiden und ist ein natürlicher Emulgator, der den Backteig leichter verarbeitbar und weicher macht.

COMPLEXFLUIDE ha sido especialmente diseñado para inducir y estimular el desarrollo óptimo de las plantas para obtener resultados más rápidos y efectivos en el metabolismo. Actúa rápido y es altamente compatible con mezclas para aplicaciones foliares. La sinergia formada entre el PHC y los macroelementos NPK favorece la asimilación de estos nutrientes, mejorando el proceso fotosintético, lo que contribuye a un mayor crecimiento vegetativo y una fructificación de mayor calidad. Packs de: • 1000 L • 20 L • 10 L • 5 L Nitrógeno (N) total :6% p/p Nitrógeno (N) uréico:4% p/p Nitrógeno (N) amoniacal :2% p/p Pentóxido de Fósforo (P2O5) soluble en agua:6% p/p Óxido de Potasio (K2O) soluble en agua:6% p/p Cloruro (Cl):<0,3 Ph:6,5-7 Densidad (gr/cc):1,19

Idropittura minerale antialga a base di silicati di potassio stabilizzato ed idrofobizzato, per la decorazione e protezione interna ed esterna di superfici sia nuove che vecchie, come intonaci base calce e cemento, intonaci base calce, intonaci deumidificanti, intonaci idrorepellenti, finiture minerali, intonaci a cappotto premiscelati, calcestruzzo. Elevatissima copertura, sicura inalterabilità agli agenti atmosferici ed ai raggi ultravioletti. Possiede caratteristiche di alta traspirabilità (infatti compatibile con sistema deumidificante) e allo stesso tempo caratteristiche di idrorepellenza. COLORE: Bianco e colori cartella CONFEZIONE: Fusto 4 - 14 lt UTILIZZO: Interno/Esterno DILUIZIONE: Pronto all'uso RESA: 7/8 mq/lt per mano COEFF. DI ASSORB. D'ACQUA CAPILLARE “W24”: < 0,10 kg/(mq*24 h½) RESISTENZA ALLA DIFFUSIONE DEL VAPORE m EQUIVALENTI “Sd”: = 0,08 m TEORIA DI KUENZLE “W*Sd”: < 0,01 kg/(mq*24 h½) CONFORME ALLA DIN 18363

This is a multipurpose potting and germination mix for home use. The mix suits the needs of most loved homeplants in small pots and trays, it can be used for repotting in bigger pots and containers as well. The substrate is also suitable for soil improvement in the garden and as a growbag for vegetables outside or in the greenhouse. For flowers, including: chrysanthemums, pelargoniums, viola, primula, antirrhinum, surfinia, petunia, begonia, red hydrangea, calanchoe. Green plants. Herbs: basil, oregano, thyme etc. Vegetables: cucumber, tomato, capsicum, etc. This substrate should not be used for acidophilic plants. The substrate includes neutralised natural peat, wetting agent and starter fertiliser with trace elements. After 3-4 weeks from the start of use additional fertilisation should begin.Completed with regular irrigation and enough sunlight your plants will thrive in the Potting Mix. Mikskaar Potting mix makes your plants grow better!

DÉFINITION TECHNIQUE Enduit décoratif à projeter en pâte prête à l’emploi pour un usage en murs et plafonds intérieurs. Permet de rattraper dans une certaine mesure les défauts du support tels que bullages et balèvres. Peut être appliqué en tant qu’enduit de lissage ou en relief structuré type « gouttelette ». Différentes teintes et qualité lavable sur demande. DOCUMENTS À CONSULTER DTU 59.1. PV CSTB N°R.A.97.179 : classement au feu MO. COMPOSITION ET ASPECT Résine acrylique en émulsion, charge minérale, dérivés cellulosique, agent de conservation et divers adjuvants. La pâte est de couleur blanche et de consistance adaptée à la projection mécanique. CARACTÉRISTIQUES TECHNIQUES • Extrait sac : 72% • Densité : 1,6 SUPPORTS ADMIS Béton plus ou moins bullé, béton brut de décoffrage, béton cellulaire, carreaux de terre cuite, première couche lissée de SOLIDECOR, agglos, enduits plâtre, anciennes peintures, enduit ciment, carreaux de plâtre, plaques de...

Gübreler, toprakta eksik olan elementlerin tamamlanması ve toprağın daha verimli hale gelmesi için kullanılan maddelerdir. Tarımın bir endüstri haline gelmesiyle kimyasal gübrelerin kullanımı daha yaygın hale gelmiştir. Bu gübreler kimyasal içermeleri nedeni ile hem toprağın genetik yapısını bozmakta hem de yetiştirilen ürünlerin zararlı kimyasallarla temas etmesini sağlamaktadır. Bu sorun ile karşılaşmamak ve toprak kalitesini korumak için organik gübreler tercih edilmelidir. Solucan gübresi organik gübreler söz konusu olduğunda akla gelen ilk isimdir. GARANTİ EDİLEN İÇERİK Toplam Organik Madde % 10 Toplam Azot % 0,5 Organik Azot % 0,3 Suda Çözünür K 2 O % 1 PH 6-8 Maksimum EC 2

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

AUTOSOL® LEDER REINIGER Cleaning and colour refreshing agent for all smooth leathers as well as artificial and vinyl leathers. The product gives new colour depth, matt shine and elasticity. Item number:01 001040

A REAL REVOLUTION IN THE FASTENING AND ASSEMBLING TECHNOLOGY FOR SEALING, STICKING, FASTENING • Can be applied on every kind of metals and many other material • Very elastic and resistant, also against seawater • Quick polymerization, very high adhesive power • High abrasion resistance • Overpaintable and sandable • Without smell, not corrosive and not flammable • No shrinkage, no sag APPLICATION BRANCHES • Motor vehicles • Caravans, boats • Buildings CARCOFLEX 6600 represents a true revolution in the world of the one component, polyurethanic-based sealants. Our product is the result of the most complete synthesis of all characteristics, an adhesive sealant has to show, to be suitable for the auto transport, the artisanship, the building and the ship's branch.. In the specific auto transport branch the application fields are mainly the assembling of spoilers, chassis and profiles on the car, as well as the assembly of plate, plastic and wood parts on vans, ca

High resistance to Flash cure temperatures Extra strong adhesive at high temperatures Fast tack Long lasting adhesive It neither transfers nor stains the fabrics Suitable for all types of fabrics, especially the heavy ones Colourless